XHF 3/4 Inch Self Adhesive Cable Zip Tie Mounts – Home Office and Desk Wire Management for Computer, USB and Charging Cables
XHF 3/4 Inch Self Adhesive Cable Zip Tie Mounts – Home Office and Desk Wire Management for Computer, USB and Charging Cables
Couldn't load pickup availability
Why you'll love it
- No-drill, tool-free installation via 3M peel-and-stick adhesive saves time and avoids wall damage
- Dual mounting options (adhesive OR included screws) let users choose the right hold strength per surface
- UV-protected nylon holds up to sunlight and weather for reliable outdoor lighting displays
- Bulk 100–200 piece kits cover whole-home or vehicle projects in a single purchase
- Discreet black or white color options blend with walls, trim, and surfaces for a clean look
- PA66 nylon construction is tougher and more heat-resistant than generic plastic mounts
Perfect for
- Tidying TV and home theater cables along baseboards and behind entertainment centers
- Mounting Christmas lights and string lights on outdoor eaves and patio rails
- Routing computer, USB, and charging cables under desks and workstations
- Securing automotive wiring and aftermarket accessory cables inside vehicles
- Anchoring lightweight furniture to walls as a tip-prevention safety measure
100 Pack
High quality UV resistant nylon zip tie mounts can help you even outdoors. With a strong self-adhesive back, stable to help you fix the base.
100 Pack
We match you with 8 " Industrial grade nylon zip ties. Strong, flexible, with industrial grade strength, strong UV resistance, suitable for multiple projects.
100 Pack
We will prepare spare self tapping screws for you in the package, so that you can apply them on the rough surface or the surface where glue is difficult to stick. We want to make sure our products are available to you everywhere.
Suggestions on the use of cable tie mounts:
Clean Use Environment
Before using self-adhesive mounting, make sure that the surface to be pasted is free of dust or other impurities, and ensure the surface is smooth, so that the glue adhesion can play the greatest role.
Tear Off The Backing Paper Cleanly
Try to grasp a small corner of mounts, and avoid touching the gum with fingers after tearing, so as to ensure that the gum is clean.
Press and Wait Properly
When you stick the mounts on the surface of the object, press it with appropriate force for about 10 seconds. Hang or bind the object 12 hours after fixation. The purpose of this is to make the back glue fully integrate with the contact surface, increase the viscosity and prolong the service life.
Screws Where Necessary
When you encounter an object that is difficult to stick, you can use screws to fix the base 100%.
Product Information
High quality material：XHF Adhesive Zip Tie Mounts are manufactured from 3M Strong Adhesive and PA66 nylon. Wire tie downs without tools. Simply peel off the backing paper command strip place firmly on a clean, dust-free surface for best adhesion. Anti-Tip furniture anchors,suitable for cars, house and office, can be applied to various cables such as computer cables, TV cables, Christmas lights cable, USB cables and so on Note: Clean the surface of the dust before use,glue is best to be glued once and should not be disassembled repeatedly. After applying self-adhesive glue, it should be used 24 hours apart. 100pcs Cable tie mounting/100PCS 8" zip ties/100PCS Screws.
Technical Details Material Nylon Color Black Brand XHF Item Length 8 Inches Style Zip Maximum Diameter 8 Inches Number of Pieces 300 Manufacturer XHF UPC 738629963108 Part Number LJJ-22FR4-27 Item Weight 6.7 ounces Item model number LJJ-22FR4-27 Size 100 Piece Item Package Quantity 1 Batteries Included? No Batteries Required? No
Frequently Asked Questions
Will the 3M adhesive hold up under a desk where I run my monitor, laptop and lamp cables all day?
Yes. The 3M strong adhesive backing on these XHF mounts is engineered for tool-free, long-term hold on smooth indoor surfaces like desk legs, baseboards, and the back of furniture. Bundling power, USB and video cables into the included 8 inch zip ties and lifting them off the floor keeps your home office setup clean and reduces tangles during focused work.
Can I use these cable mounts in a standing desk setup that adjusts up and down daily?
Yes. Mount the XHF adhesive squares to a fixed surface like the desk frame, wall, or a stationary cable tray, then run cords through the zip ties with a small amount of slack. The PA66 nylon body flexes without cracking, and the UV protected adhesive stays put through repeated height changes.
Do I need screws for an office desk or are the sticky pads strong enough?
For most home office surfaces like the back of a desk, a media console, or a baseboard, the 3M peel-and-stick adhesive is strong enough on its own. The included screws are there as a backup for rough, textured, or load-bearing surfaces where mechanical fastening is preferred.
Will the black or white color clash with my light colored home office furniture?
XHF offers both black and white options specifically so you can match your cable mounts to walls, trim, or furniture. The 3/4 inch square footprint is also small and discreet, so the mounts read as part of the setup rather than a visible accessory.
Does this help with a video call background that keeps catching dangling cords?
Yes. By routing your power strip, webcam, microphone, and monitor cables along the back edge of the desk with XHF mounts and zip ties, you eliminate the loose cable drape that shows up behind you on camera, which is one of the most common distractions in remote work video calls.
Is this a good cable management solution for a small home office in a rented apartment?
Absolutely. The tool-free 3M adhesive means no drilling into walls, which most landlords require you to avoid. You can mount the XHF squares to the back of the desk, the baseboard, or even the legs of your chair to keep power and charging cables lifted, organized, and out of sight.
Will this help me keep a power strip off the floor under my workstation?
Yes. You can mount a power strip to the underside of your desk using XHF adhesive cable tie mounts and the included zip ties, which lifts bulky plugs and adapters off the carpet where they collect dust and create trip hazards during deep work sessions.
Can I reroute cables later if I rearrange my desk for a new project?
Yes. The 8 inch zip ties can be cut and replaced, and the adhesive mounts can be removed and repositioned on a clean surface. This makes XHF mounts a flexible solution if you switch between sitting and standing desks, dual monitors, or a single laptop workflow.
Is this better than a cable management box for a focused work setup?
It depends on the clutter, but for most home office desks, XHF adhesive mounts and zip ties are more effective because they keep cables routed and lifted along the desk frame where you can see and access them, while a cable box just hides a tangled mess out of sight.
How quickly can I set this up at the start of a new work week?
Most home office users finish a full desk cable management pass in under 20 minutes. Wipe the surface clean, peel and stick the XHF mounts every 6 to 8 inches along the planned cable run, thread the zip ties, and bundle. No tools, no downtime, and no disruption to your Monday morning focus ritual.
Will the adhesive damage my wooden desk if I ever want to remove the mounts?
The 3M adhesive is designed to hold firmly but release cleanly from most sealed wood, laminate, and metal surfaces when pulled slowly at a low angle. For delicate or unfinished wood, test one mount in a hidden spot first or use the included screws for a fully reversible install.
How do I install XHF adhesive cable tie mounts on a smooth surface?
Clean the surface with isopropyl alcohol and let it dry completely. Peel the red backing film off the 3M adhesive pad, press the mount firmly onto the surface for 10 to 15 seconds, then wait 24 hours for the adhesive to fully cure before loading it with cables and zip ties.
Can I use the included screws instead of the adhesive?
Yes. Every XHF pack includes matching screws for optional mechanical fastening. Pre drill a small pilot hole if you are mounting into hard wood or masonry, then drive the screw through the center of the mount until it sits flush against the surface.
How much weight can each cable tie mount hold?
On a properly prepared smooth indoor surface, each 3/4 inch mount comfortably supports the weight of a small bundle of low voltage cables like HDMI, USB, lamp cords, and string light wiring. For heavier loads, long spans, or rough outdoor surfaces, use the screw mounted version and space the mounts closer together.
What size zip ties fit these mounts, and can I reuse my own?
The included zip ties are 8 inches long, which fits the square opening of the 3/4 inch mount. Any standard width zip tie up to about 0.2 inches wide will also fit, so you can use your own longer or colored ties if you prefer.
Do these work on glass, metal, plastic, and painted drywall?
Yes. The 3M adhesive is formulated to bond to smooth, non porous surfaces including glass, metal, sealed wood, plastic, and painted drywall. For porous surfaces like brick, concrete, stucco, or unfinished wood, use the included screws for a secure hold.
What is included in the XHF 100 piece and 200 piece kits?
Each kit includes the selected count of 3/4 inch XHF cable tie mount squares in your choice of black or white, a matching count of 8 inch zip ties, and a set of mounting screws for optional screw installation on rough or load bearing surfaces.
Is the adhesive safe to use on freshly painted walls?
Wait at least 7 to 14 days after painting for the paint to fully cure before applying the 3M adhesive. Applying adhesive to fresh paint can cause the paint to lift when the mount is removed later, which is the most common cause of wall damage with any adhesive cable mount.
Will these mounts hold up in a hot garage or attic?
Yes. The PA66 nylon body is rated for higher heat resistance than generic plastic cable clips, and the 3M adhesive maintains its bond across a wide temperature range, making XHF mounts suitable for garages, attics, and utility spaces with elevated temperatures.
What is the difference between adhesive cable mounts and cable raceways?
Adhesive cable mounts like XHF are small individual squares that hold a bundled cable run flat against a surface, which is discreet and flexible. Cable raceways are rigid plastic channels that fully enclose cables. Mounts are best for clean, low profile installs where you want the cable to follow the room, while raceways are best when you need a fully enclosed protective channel.
