Command Outdoor Light Clips – Minimalist Clear Light Hooks for Uncluttered Walls and Intentional Home Design
Command Outdoor Light Clips – Minimalist Clear Light Hooks for Uncluttered Walls and Intentional Home Design
Couldn't load pickup availability
Why you'll love it
- No holes, marks, or sticky residue left on siding, soffits, or interior walls
- Holds strong through rain, snow, sleet, and heat so decorations stay up all season
- Reusable clips with inexpensive replacement strips extend product life and value
- Clear plastic blends into trim and walls instead of standing out as a visible hook
- Tool-free installation means no ladder drilling, electrical work, or professional help
- Safe for rental properties where landlords prohibit permanent modifications
Perfect for
- Hanging outdoor string lights along eaves for Christmas or year-round ambiance
- Mounting patio bistro or café lights on fences, railings, or pergolas without drilling
- Organizing and routing outdoor extension cords and cable runs along siding
- Adding LED or rope lights to a dorm room or apartment balcony in a renter-friendly way
- Temporary event lighting for weddings, parties, or backyard gatherings
Heavyweight Products
Visit the Store
General Purpose Hooks
Visit the Store
Picture Hangers
Visit the Store
Clear Hooks
Visit the Store
Bath Organizers
Visit the Store
Decorative Hooks
Visit the Store
Cord Management / Kits
Visit the Store
Command Outdoor Products
Water- and UV-resistant, Command Outdoor adhesive holds strongly year-round in rain, snow, and hot weather. Easy-on, easy-off so you can redecorate damage-free for every season.
Product Information
ONE LIGHT CLIP FOR EVERY TWO FEET OF LIGHTS: One package of the Command Clear Outdoor Light Clips includes 20 clear hooks and 24 small water-resistant Command Strips; use one light clip for every two feet of lights
DAMAGE FREE HANGING: Water- and UV-resistant, these outdoor clips hold strongly through rain, snow, sleet and heat to let you hang outdoor lights on a variety of smooth indoor or outdoor surfaces without tools
WORKS ON A VARIETY OF SMOOTH OUTDOOR SURFACES: Outdoor string lights bond to doors, flat vinyl siding, soffits, finished fences, tile, painted cinder block and windows
SURFACE PREP: Clean with a dry cloth to remove dirt and debris to allow the outdoor tool free wall hangers to bond to the surface; 3M Outdoor Light Clips hold strongly in outdoor temperatures between 15 degrees Fahrenheit and 125 degrees Fahrenheit
USAGE TIPS: Not recommended for use on rough surfaces, such as brick, cement board or rough-sawn wood; wait 1 hour after wall clip installation before hanging lights; do not use the wall clips for hanging valuable or irreplaceable items
EASY CLEAN REMOVAL: Lightly hold the top of the adhesive strip and slowly pull straight down towards the ground to remove the Command Outdoor Light Clips from your surfaces and prevent surface damage; reuse your hook with small replacement strips
Command Clear Outdoor Light Clips brighten up the interiors and exteriors of your living or working spaces without damaging surfaces. These clear clips blend into walls so you can showcase your decor. They also are water- and UV-resistant to hold strong through rain, snow, sleet and heat. A great home improvement item, these wall clips stick on a variety of smooth surfaces without leaving holes, marks or residue. Use these outdoor wall clips for hanging outdoor Christmas decorations, holiday lights, LED lights, rope lights, string lights, cables and cords. Mount these light hooks on doors, flat vinyl siding, soffits, finished fences, tile, painted cinder block and windows and enjoy the damage free hanging of your favorite lights. Use these light hooks inside or outside your home, office, apartment or dorm room to elevate the appearance of your space without tools. Directions are included that show how to use the wall clips. A clever decorating solution that doesn’t damage surfaces, these light clips will help you fearlessly change your space. One package contains 20 clear outdoor light clips and 24 small Command Strips. Use one light clip for every two feet of lights. Decorate, organize and celebrate damage free with Command.Part Number: AW017-20NA
Item Weight: 2.4 ounces
Product Dimensions: 1.25 x 0.82 x 0.5 inches
Size: 20 Clips
Color: Transparent
Style: 20 Clips
Material: Plastic
Pattern: Clips
Shape: Rectangular
Item Package Quantity: 1
Type of Bulb: String Light
Mounting Type: Wall Mount
Special Features: water resistant
Included Components: 20 Clips, 24 Strips
Batteries Included?: No
Batteries Required?: No
Date First Available: October 30, 2017
Frequently Asked Questions
Will the clear clip really disappear against white walls and trim?
Yes, the clear plastic is specifically chosen to blend into neutral surfaces. In a minimalist space with white or light walls, the clip becomes essentially invisible once a light string is threaded through it.
I hate visible cords and hooks - does this actually keep things clean looking?
The clip holds the wire flat against the wall, which is the cleanest possible cable management solution. There is no dangling loop, no bulky hook silhouette, and no exposed adhesive patch.
Can I achieve a perfectly straight line of lights with these clips?
Yes, which is the whole point for a minimalist look. Pre-measure your spacing, mark it lightly with a pencil, then press each clip into place. The result is a clean, architectural line of light with no sag.
Are these compatible with the less-is-more Scandinavian or Japandi aesthetic?
Absolutely. Neutral palettes, intentional design, and 'only what you need' are exactly the principles this product supports. The hardware stays out of the way so the light, the texture, and the negative space do the talking.
Will the clips themselves become visual clutter in an uncluttered room?
Because they are clear and sit flush against the surface, the visual weight is near zero. Compared to a black metal hook or a curved Command hook, this is the lowest-profile option on the market.
Is this the right tool for an intentional, cable-free patio design?
Yes. Extension cords and light cables can ruin a minimalist patio. Routing them flat against the wall with these clips keeps every wire tucked along the architecture rather than crossing open space.
How does this compare to a traditional black outdoor light clip?
Traditional black clips stand out sharply against light siding and are the first thing your eye lands on. The clear version was designed to recede so the focus stays on the light itself, not the hardware holding it.
What about using zip ties or twine for a 'natural' minimalist look?
Twine and zip ties either stretch, rot, or damage the surface. The Command system gives you that same clean, intentional result with industrial-grade holding power and a removable adhesive you can trust.
I do not want to add anything to my walls that I will regret. Is this truly damage free?
Yes, on properly prepared smooth surfaces. Pull the strip straight down to release, and the adhesive stretches and releases without pulling paint or leaving residue. It is the only option that lets you decorate with zero long-term commitment.
How few clips can I use and still get a clean minimalist line?
One clip every two feet is the recommended spacing for a taut, even line. Fewer clips will let the wire sag and break the clean look. The 20-pack handles up to 40 feet of light string in a single stretch.
Is the packaging itself minimalist, or will I have a lot of plastic to throw away?
Command packaging is compact and recyclable in most curbside programs. There is no excessive plastic blister pack inside - just the clips and strips in a simple tray.
How do I install Command Outdoor Light Clips step by step?
Clean the surface with rubbing alcohol and let it dry. Separate a small Command Strip, press it onto the back of the clip, remove the liner, and press the clip firmly to the wall for 10 seconds. Wait one hour for the adhesive to set, then thread your light string into the clip. To remove later, pull the strip straight down.
Can I reuse the same clip after I remove it?
Yes, that is the main value proposition. The plastic clip itself is reusable indefinitely - you only need a fresh small Command Strip refill (sold separately in multi-packs) to remount it. The product is designed for seasonal use, not single-use.
How many feet of light string will one pack cover?
Plan on one clip every two feet of light string. The 20-clip pack supports roughly 40 feet of clean, even light line. For longer runs or a denser pattern, buy multiple packs to maintain the recommended spacing.
Are these clips compatible with all string light wire gauges?
They work with most standard outdoor and indoor string lights up to a medium wire gauge, including common patio bistro lights, fairy lights, and LED rope lights. Very thick commercial cable may need a larger clip variant.
Do they work on vinyl siding, brick, stucco, and wood?
They bond to smooth, sealed surfaces including vinyl siding, soffits, finished wood, painted cinder block, tile, metal, and glass. They do not bond reliably to rough stucco, raw wood, brick, or peeling paint. Test a small area if you are unsure.
What is included in the box and what do I need to buy separately?
The box includes 20 clear plastic light clips and 24 small water-resistant Command Strips. You provide your own string lights, rubbing alcohol for surface prep, and replacement small Command Strips if you want to remount after removal. The included 24 strips give you 4 extras beyond the 20 clips.
Are Command Strips safe on freshly painted walls?
Wait at least 7 days after painting before applying any Command Strip so the paint can fully cure. Applying sooner risks pulling fresh paint off when the strip is removed. Once cured, removal is clean and damage free.
What temperature range can these clips handle outdoors?
The included water-resistant strips are rated for outdoor temperatures from 15°F to 125°F. That covers virtually every climate in the continental US, including snowy winters and hot summer patios in direct sun.
What is the difference between Command Light Clips and Command Hooks?
Command Hooks have a curved hook for hanging objects like keys or wreaths, while Command Light Clips have a low-profile channel that grips a wire flat against the wall. For string lights, the clip is the right tool - the wire stays flush and the look is much cleaner.
